Orange Sky logoORANGE SKYMALAYSIA
Products & services

Metals & engineered products

HYDROFITHoses, fittings, assemblies
& crimping machines

HYDROFIT brings together hoses, fittings, made-to-order assemblies and crimping-machine enquiries. Orange Sky’s presence in Ningbo supports sourcing and order coordination, with each selection reviewed for the actual application.

Supplied photograph of HYDROFIT hydraulic hose

Products & applications

The supply scope

Mobile and construction equipment · Industrial hydraulic systems · Maintenance and hose assembly workshops · Application-specific fluid transfer

Hydraulic hoses

Low-, medium- and high-pressure requirements, including braided and spiral-reinforced constructions. The selected product must suit the working pressure, pressure surges, fluid, temperature, routing and bend requirements. Pressure descriptions alone are not a specification.

Industrial transfer hoses

Enquiries for air, water, oil and other industrial fluid-transfer duties are assessed by the material conveyed and operating conditions. Chemical, steam, food-contact and gas duties require specifically suitable products and documentation.

Fittings, ferrules and adapters

Straight and angled connections, ferrules and adapters in the required material and connection system. Identify JIC, BSP, metric, ORFS or other ends precisely, including thread, sealing face and orientation; similar-looking connections may not be interchangeable.

Hose assemblies

Cut-to-length assembly requirements reviewed against a drawing or complete end-to-end specification. Include end orientation, overall length, protective sleeves, cleanliness and any agreed pressure-test or identification requirements.

Crimping and workshop equipment

Crimping-machine enquiries should state the hose construction and maximum assembly size, fittings, production volume and available power supply. Cutting, skiving and testing requirements can be considered with the workshop setup.

Application-specific connectors

Flexible plumbing and other specialist connectors are separate product families. A shower or faucet hose must not be selected for hydraulic pressure duty merely because its external braid looks similar.

Technical overview

How a hydraulic hose is specified

  1. Inner tube

    Compatible with the conveyed fluid

  2. Reinforcement

    Wire braid, spiral or textile

  3. Outer cover

    Environment and abrasion protection

  4. End fittings

    Matched hose, ferrule and crimp data

Conceptual hose construction, not an assembly drawing. Working pressure, temperature and bend radius apply to the selected system.

Specification guide

Specify a matched assembly

General purchasing guidance. Grade examples and reference standards are subject to technical review; availability and final acceptance criteria are agreed for each order.

ElementWhat to specifyWhat to verify
HoseFluid, size, working pressure, temperature and movementTube/cover compatibility, reinforcement, bend radius and applicable standard
End connectionsThread, sealing geometry, size, angle and orientationBSP and NPT differ; JIC flare and ORFS use different sealing systems
AssemblyOverall length and how measured, routing and protectionApproved hose/fitting pairing, crimp data and cleanliness
Crimping machineLargest assembly, hose construction, production needs and powerDie set, crimp range, calibration, guarding and technical support scope
AcceptanceMarking, traceability and inspection requirementManufacturer-approved process and specified proof/impulse evidence
Supplied photograph of HYDROFIT hydraulic hose

Specify the assembly,
not just the hose.

Photographed markings relate to the pictured product only. Confirm the selected hose, fittings and crimp instructions for the required fluid, working pressure and operating conditions.

Supplied HYDROFIT water suction and discharge hose photograph

Procurement notes

Start with the application

A useful hose enquiry describes what flows through the assembly and how it operates. Share your drawing or existing part reference together with the service conditions for technical review.

Crimp ferrules, hydraulic hose assemblies and hose clamps

Use a matched system

Hose, fittings, ferrules and crimp settings must be compatible. Selection should follow the product manufacturer’s instructions and the assembly specification.

Describe the working environment

Give fluid type and concentration, fluid and ambient temperatures, pressure cycle, abrasion exposure and available routing space. Include suction or special electrical requirements where relevant.

Confirm machinery support

Tooling, operating instructions, commissioning needs, spares and support terms should be agreed for the selected machine. Stock and delivery timing are checked for each enquiry.

Packing, inspection & documentation

Agree coil or reel lengths, end protection, assembly labels, packing and test records. Identify any cleanliness requirements before assembly, and preserve product identification through receipt and installation.

HYDROFIT Hoses, Fittings, Assemblies and Crimping Machines · Enquiries

A useful quotation
starts here.

Send the details below. Supply scope, specification, origin and commercial terms are confirmed in the individual offer.

  • Fluid, application and working pressure
  • Temperature, hose bore and length
  • End connection details and orientation
  • Assembly drawing and testing
  • Machine capacity, tooling and electrical supply
Build this enquiry

Connect with Orange Sky

Find us on WeChat.

Scan the QR code with WeChat, or add us using our WeChat ID.

WeChat contact QR code supplied by Orange Sky for Joshi79in

On your phone, save the QR image, then open WeChat’s scanner and choose it from your photos.

Open QR image